EPROM ( 25 ) :

• Data formats

• Intel HEX File Format   
• Intelhex - Info and conversion for the Intel HEX format to binary   
• Intel Hex Format - short description   
   

• Programmer/reader circuits

• Amigan eprommer - simple eprommer circuit for Amiga, programs up to 27C512  
• Andrew's EPROM Programmer - connects to PC parallel port, recommended by Home-made EPROM gear page   
• An EPROM Reader For Under USD$5   
• E(E)PROM Programmer - With this circuit you can build your own E(E)PROM programmer. The programmer can read, write and erase most of the usual EPROMS and EEPROMS. The device is connected to the parallel port and is operated from the Assembler & Programmer software.   
• Eprom Programmer - works with Windows(95), programs parallel eproms 27C64..27C040/4001 and many more types   
• EPROM programmer for lpt port for 2732 to 27512 - all documentation in german, zipped file   
• Eprom Programmer Mark 1 - suitable for occasional home use, without the extra features found on many commercial units, will program the standard 27 family of devices, from 2716 to 27512, and can be used with any computer which has an RS232 serial port   
• Eprom Programmer Mark 2 - handles 2764, 27128, 27256 and 27512, can be used with any IBM PC compatible computer as the controller and data source   
• Flash / EEPROM Programmer   
• Low-cost circuit programs EEPROMs - When you migrate to 3.3V system supplies, you must usually replace your old, reliable EEPROM programmer with a new, overly flexible and expensive universal programmer. For less than $100, the circuit extends the functional life of any 5V EEPROM programmer. You can apply the circuit to any bidirectional 5 to 3.3V level-translating application.   
• PonyProg serial device programmer - If you are looking for a simple but powerful programmer you are right, it's here. PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows95, 98, 2000 & NT and Intel Linux. Its purpose is reading and writing every serial device. At the moment it supports I�C Bus, Microwire, SPI eeprom, the Atmel AVR and Microchip PIC micro.   
• Selbstbau-93Cx6-EEPROM-Programmierer von DL7AWL - EEPROM programmer which connects to parallel port, text in German   
• Stand-Alone EPROM programmer - zipper demo file from   
   

• EPROM emulators

• Centronics programmable EPROM emulator with SRAM and battery   
• Design for a PROM emulator   
• Eprom Emulator by Paul Stenning - originally published in ETI, December 1994   
• EPROM Simulator 32 kB - includes circuit board and software for DOS and Linux   
• Flash / EEPROM Programmer and Emulator   

Other programmers

• Serial EEPROM Programmer - Very useful software for reading and writing 93Cxx, 24Cxx, and 24Wxx series EEPROMs. Needs only a very simple hardware, connects to parallel or serial port.   
• GALBlast - hobbyist grade GAL� programmer that connects to the parallel printer port of your PC, will program fusemaps stored in standard JEDEC files into GAL chips 16V8/A/B/C/D/Z/ZD, 18V10/B, 20V8/A/B/Z, 20RA10/B, 20XV10/B, 22V10/B/C/Z, 26CV12/B, 6001/B and 6002B manufactured by Lattice, National Semiconductors and STMicrosystems   
• GACBlash GAL� programmer - Build this little electronic circuit and use the GALBlast software to program JEDEC files into GAL chips from Lattice, National Semiconductors and ST-Microsystems.   
• PonyProg - for reading and writing almost every serial device, software for Windows95, 98 & NT and Intel Linux, supports IC Bus, Microwire, and SPI eeprom and the flash ATMEL AVR AT90SXXXX microcontrollers, and PIC micro   

 back to : Links >> Computer Hadrware