Surround sound ( 3 ) :
Digital audio circuits ( 17 ) :
-
S/PDIF
-
SCMS
- A
SCMS killer circuit - should work with all DAT decks that have a Sony
CXD2601 signal processor, published in September 1992 in "Stereoplay",
also available at
- Copybit
deleter - sets the copybit in digital audio signals to enable copying
of digital recordings
- Defeat
SCMS page - SCMS removing circuit for Sony DTC790 DAT recorder using a
circuit designed for recorders with a CXD2601 chip.
-
DAC
-
Signal conversion
-
Equipment modifications
- AC-3
for the CLD-1090 and CLD-XXXX - how to add an AC-3 RF output to older
laser disc player
- CDplayer's
Project - information to make and upgrade a CDPlayer at home
- Common
AC-3 RF Circuit Designs - The following circuits are three popular
AC-3 buffer designs used in most laserdisc players currently on the
market. Since all the designs are simple variations of an
emitter-follower, these circuits act as current buffers with the ability
to change the DC level for muting.
- DIY
Dolby Digital Modification Page - Do-It-Yourself Dolby Digital (AC-3)
Laser Disc Player Modification Page
- The
d-box in a better look - Everything described here relates to the
Mediamaster�? 9200, 9500 and 9600 as well as to the d-box�? available
until december 1999. This page described how to add S/P-DIF Output to this
DTV box.
-
Audio recording/playback
- 120
Second Voice Recorder - Record as many messages as you can in this
modern, non- volatile, combined audio processing & memory chip from
Information Storage Devices (
- Velleman
K8030 Electronic Recording/Playback Module - Up to 20 seconds of
recording time, EEPROM technology, speaker and line outputs and microphone
input. Option for message selection switch. This circuit is based on
ISD1400 IC. Kit manual has full circuit diagram.
-
Misc
back to :
Links >>
Electronic Circuits >>
Audio Circuits
|